First be Best, Then be First

Oak Latte Macchiatto

Product Description

Wood characteristics:

  • varied colours, any jar
  • minimal whiteness and shine
  • healthy small knots
  • special white undercoat
  • suitable for underfloor heating

Details of the floor

Painted version:

  • 7 layers of varnish – hardened with UV rays
  • varnish permanently bonded to the wood, does not crack or peel off
  • high abrasion resistance

Oil-waxed version:

  • 3 layers of Osmo oil-wax – hardened with UV rays,
  • deep wood impregnation through oil penetration,
  • high abrasion resistance.

Finish Board

  • The top layer, usable approx. 6 mm, 4 mm ECO (board thickness 14 mm) or 3 mm (board thickness 12 mm) consists entirely of a solid element – natural wood. The bottom layer is a mosaic made of hard deciduous wood, mainly oak and ash. Joining the layers perpendicularly introduces a crosswise arrangement of the grain of the top layer in relation to the bottom part, which ensures stabilization and prevents the floor from warping.
  • This structure enables the multiple process of sanding (renewing) the floor, thanks to which it serves and delights for years and generations.
  • The most modern tongue-and-groove connection system allows for simple and efficient installation of the floor. At the same time, it allows the floor to be laid in various patterns and combinations thanks to the production of elements with the right and left tongue variant. The technological structure of each element as well as the method of connecting and installing completely eliminate the resonance effect.
  • Finish Board is also an ideal solution for underfloor heating. The perfect design and the best quality raw material used in the production process make the floor perfectly compatible with this type of heating, and the thermal transmittance coefficient guarantees reduction of energy losses to a minimum.

Additional Information

DimensionsThickness 14 mm
Width 130-150 mm
Length 900-1200 mm
or
Thickness 12 mm
Width 140-150 mm
Length 800-1200 mm
Wear layer thickness3-4 mm
Bottom layerHardwoods
Method of hardening the oil-waxUV radiation
Possibility of sandingRepeatedly
Indoor useAll residential except bathrooms

Oak Exclusive

Product Description

Wood characteristics:

  • similar colours, any jar
  • acceptable minimum whiteness, healthy small knots
  • acceptable minimum gloss
  • suitable for underfloor heating

Details of the floor

Painted version:

  • 7 layers of varnish – hardened with UV rays
  • varnish permanently bonded to the wood, does not crack or peel off
  • high abrasion resistance

Oil-waxed version:

  • 3 layers of Osmo oil-wax – hardened with UV rays,
  • deep wood impregnation through oil penetration,
  • high abrasion resistance.

Finish Board

  • The top layer, usable approx. 6 mm, 4 mm or 3 mm, consists entirely of a solid element – natural wood. The bottom layer is a mosaic made of hard deciduous wood, mainly oak and ash. Joining the layers perpendicularly introduces a crosswise arrangement of the grain of the top layer in relation to the bottom part, which ensures stabilization and prevents the floor from warping.
  • This structure enables the multiple process of sanding (renewing) the floor, thanks to which it serves and delights for years and generations.
  • The most modern tongue-and-groove connection system allows for simple and efficient installation of the floor. At the same time, it allows the floor to be laid in various patterns and combinations thanks to the production of elements with the right and left tongue variant. The technological structure of each element as well as the method of connecting and installing completely eliminate the resonance effect.
  • Finish Board is also an ideal solution for underfloor heating. The perfect design and the best quality raw material used in the production process make the floor perfectly compatible with this type of heating, and the thermal transmittance coefficient guarantees reduction of energy losses to a minimum.

Additional Information

DimensionsThickness 14 mm
Width 130-150 mm
Length 900-1200 mm
or
Thickness 12 mm
Width 140-150 mm
Length 800-1200 mm
Wear layer thickness3-6 mm
Bottom layerHardwoods
Method of hardening the oil-waxUV radiation
Possibility of sandingRepeatedly
Indoor useAll residential except bathrooms

Satin Grey

Product Description

Wood characteristics:

  • varied colours,
  • any jar, white
  • healthy and putty knots up to 2 cm,
  • acceptable glance,
  • structured floor,
  • suitable for underfloor heating

Details of the floor

Painted version:

  • 7 layers of varnish – hardened with UV rays
  • varnish permanently bonded to the wood, does not crack or peel off
  • high abrasion resistance

Oil-waxed version:

  • 3 layers of Osmo oil-wax – hardened with UV rays,
  • deep wood impregnation through oil penetration,
  • high abrasion resistance.

Finish Board

  • The top layer, usable approx. 6 mm or 4 mm ECO, consists entirely of a solid element – natural wood. The bottom layer is a mosaic made of hard deciduous wood, mainly oak and ash. Joining the layers perpendicularly introduces a crosswise arrangement of the grain of the top layer in relation to the bottom part, which ensures stabilization and prevents the floor from warping
  • This structure enables the multiple process of sanding (renewing) the floor, thanks to which it serves and delights for years and generations.
  • The most modern tongue-and-groove connection system allows for simple and efficient installation of the floor. At the same time, it allows the floor to be laid in various patterns and combinations thanks to the production of elements with the right and left tongue variant. The technological structure of each element as well as the method of connecting and installing completely eliminate the resonance effect.
  • Finish Board is also an ideal solution for underfloor heating. The perfect design and the best quality raw material used in the production process make the floor perfectly compatible with this type of heating, and the thermal transmittance coefficient guarantees reduction of energy losses to a minimum.

Additional Information

DimensionsThickness 14 mm
Width 130-150 mm
Length 900-1200 mm
Wear layer thickness4-6 mm
Bottom layerHardwoods
Method of hardening the oil-waxUV radiation
Possibility of sandingRepeatedly
Indoor useAll residential except bathrooms

Oak Nature

Product Description

Wood characteristics:

  • varied colours
  • any jar
  • edge whiteness allowed up to 15% of the width of one element
  • acceptable glance
  • healthy knots and putty without restrictions
  • suitable for underfloor heating

Details of the floor

Painted version:

  • 7 layers of varnish – hardened with UV rays
  • varnish permanently bonded to the wood, does not crack or peel off
  • high abrasion resistance

Oil-waxed version:

  • 3 layers of Osmo oil-wax – hardened with UV rays,
  • deep wood impregnation through oil penetration,
  • high abrasion resistance.

Finish Board

  • The top layer, usable approx. 6 mm, 4 mm or 3 mm, consists entirely of a solid element – natural wood. The bottom layer is a mosaic made of hard deciduous wood, mainly oak and ash. Joining the layers perpendicularly introduces a crosswise arrangement of the grain of the top layer in relation to the bottom part, which ensures stabilization and prevents the floor from warping.
  • This structure enables the multiple process of sanding (renewing) the floor, thanks to which it serves and delights for years and generations.
  • The most modern tongue-and-groove connection system allows for simple and efficient installation of the floor. At the same time, it allows the floor to be laid in various patterns and combinations thanks to the production of elements with the right and left tongue variant. The technological structure of each element as well as the method of connecting and installing completely eliminate the resonance effect.
  • Finish Board is also an ideal solution for underfloor heating. The perfect design and the best quality raw material used in the production process make the floor perfectly compatible with this type of heating, and the thermal transmittance coefficient guarantees reduction of energy losses to a minimum.

Additional Information

DimensionsThickness 14 mm
Width 130-150 mm
Length 900-1200 mm
or
Thickness 12 mm
Width 140-150 mm
Length 800-1200 mm
Wear layer thickness3-6 mm
Bottom layerHardwoods
Method of hardening the oil-waxUV radiation
Possibility of sandingRepeatedly
Indoor useAll residential except bathrooms

Herringbone Oak Latte Macchiatto

Exclusive
Nature

Product Description

Wood characteristics:

  • varied colours
  • any jar
  • healthy knots and putty up to approx. 10 mm
  • acceptable gloss and edge whiteness
  • suitable for underfloor heating

Details of the floor

Oil-waxed version:

  • 3 layers of Osmo oil-wax – hardened with UV rays,
  • deep wood impregnation through oil penetration,
  • high abrasion resistance.

Painted version:

  • 7 layers of varnish – hardened with UV rays,
  • varnish permanently bonded to the wood, does not crack or peel off,
  • high abrasion resistance

Finish Board

  • English Herringbone Finish is a two-layer floor, ready after gluing, it does not require sanding or varnishing.
  • The top layer, wearable approx. 6 mm, consists entirely of a solid element – natural wood. The bottom layer is a mosaic made of hard deciduous wood, mainly oak and ash. Joining the layers perpendicularly introduces a crosswise arrangement of the grain of the top layer in relation to the bottom part, which ensures stabilization and prevents the floor from warping.
  • This structure enables the multiple process of sanding (renewing) the floor, thanks to which it serves and delights for years and generations.
  • The most modern tongue-and-groove connection system allows for simple and efficient installation of the floor. The technological structure of each element as well as the method of connecting and installing completely eliminate the resonance effect.
  • English Herringbone Finish is also an ideal solution for underfloor heating. The perfect design and the best quality raw material used in the production process make the floor perfectly compatible with this type of heating, and the thermal transmittance coefficient guarantees reduction of energy losses to a minimum.

Additional Information

DimensionsThickness 14 mm
Width 130-150 mm
Length 600-750 mm
Wear layer thickness6 mm
Bottom layerHardwoods
Method of hardening the oil-waxUV radiation
Possibility of sandingRepeatedly
Indoor useAll residential except bathrooms

Herringbone Oak Satin Gray

Product Description

Wood characteristics:

  • varied colours
  • any jar
  • sound knots and putty up to approx. 10 mm
  • acceptable gloss and edge whiteness
  • suitable for underfloor heating

Details of the floor

Painted version:

  • 7 layers of varnish – hardened with UV rays
  • varnish permanently bonded to the wood, does not crack or peel off
  • high abrasion resistance

Oil-waxed version:

  • 3 layers of Osmo oil-wax – hardened with UV rays,
  • deep wood impregnation through oil penetration,
  • high abrasion resistance.

Finish Board

  • English Herringbone Finish is a two-layer floor, ready after gluing, it does not require sanding or varnishing.
  • The top layer, wearable approx. 6 mm, consists entirely of a solid element – natural wood. The bottom layer is a mosaic made of hard deciduous wood, mainly oak and ash. Joining the layers perpendicularly introduces a crosswise arrangement of the grain of the top layer in relation to the bottom part, which ensures stabilization and prevents the floor from warping.
  • This structure enables the multiple process of sanding (renewing) the floor, thanks to which it serves and delights for years and generations.
  • The most modern tongue-and-groove connection system allows for simple and efficient installation of the floor. The technological structure of each element as well as the method of connecting and installing completely eliminate the resonance effect.
  • English Herringbone Finish is also an ideal solution for underfloor heating. The perfect design and the best quality raw material used in the production process make the floor perfectly compatible with this type of heating, and the thermal transmittance coefficient guarantees reduction of energy losses to a minimum.

Additional Information

DimensionsThickness 14 mm
Width 130-150 mm
Length 600-750 mm
Wear layer thickness6 mm
Bottom layerHardwoods
Method of hardening the oil-waxUV radiation
Possibility of sandingRepeatedly
Indoor useAll residential except bathrooms

Herringbone Oak Nature

Product Description

Wood characteristics:

  • varied colours
  • any jar
  • sound knots and putty up to approx. 10 mm
  • acceptable gloss and edge whiteness
  • suitable for underfloor heating

Details of the floor

Painted version:

  • 7 layers of varnish – hardened with UV rays
  • varnish permanently bonded to the wood, does not crack or peel off
  • high abrasion resistance

Oil-waxed version:

  • 3 layers of Osmo oil-wax – hardened with UV rays,
  • deep wood impregnation through oil penetration,
  • high abrasion resistance.

Finish Board

  • English Herringbone Finish is a two-layer floor, ready after gluing, it does not require sanding or varnishing.
  • The top layer, wearable approx. 6 mm, consists entirely of a solid element – natural wood. The bottom layer is a mosaic made of hard deciduous wood, mainly oak and ash. Joining the layers perpendicularly introduces a crosswise arrangement of the grain of the top layer in relation to the bottom part, which ensures stabilization and prevents the floor from warping.
  • This structure enables the multiple process of sanding (renewing) the floor, thanks to which it serves and delights for years and generations.
  • The most modern tongue-and-groove connection system allows for simple and efficient installation of the floor. The technological structure of each element as well as the method of connecting and installing completely eliminate the resonance effect.
  • English Herringbone Finish is also an ideal solution for underfloor heating. The perfect design and the best quality raw material used in the production process make the floor perfectly compatible with this type of heating, and the thermal transmittance coefficient guarantees reduction of energy losses to a minimum.

Additional Information

DimensionsThickness 14 mm
Width 130-150 mm
Length 600-750 mm
Wear layer thickness6 mm
Bottom layerHardwoods
Method of hardening the oil-waxUV radiation
Possibility of sandingRepeatedly
Indoor useAll residential except bathrooms

Parquet Oak Latte Macchiatto

Product Description

Wood characteristics:

  • similar colours
  • dark antique colour
  • any jar
  • edge whiteness allowed up to 15% of the width of one element
  • healthy knots and putty without restrictions
  • acceptable glance
  • special white undercoat
  • suitable for underfloor heating

Details of the floor

Painted version:

  • 7 layers of varnish – hardened with UV rays
  • varnish permanently bonded to the wood, does not crack or peel off
  • high abrasion resistance

Finish Board

  • Parquet is a two-layer floor, ready after gluing, it does not require sanding or varnishing.
  • The top layer, wearable approx. 4 and 6 mm, consists entirely of a solid element – natural wood. The bottom layer is a mosaic made of hard deciduous wood, mainly oak and ash. Joining the layers perpendicularly introduces a crosswise arrangement of the grain of the top layer in relation to the bottom part, which ensures stabilization and prevents the floor from warping.
  • This structure enables the multiple process of sanding (renewing) the floor, thanks to which it serves and delights for years and generations.
  • The most modern tongue-and-groove connection system allows for simple and efficient installation of the floor. The technological structure of each element as well as the method of connecting and installing completely eliminate the resonance effect.
  • Parquet is also an ideal solution for underfloor heating. The perfect design and the best quality raw material used in the production process make the floor perfectly compatible with this type of heating, and the thermal transmittance coefficient guarantees reduction of energy losses to a minimum.

Additional Information

DimensionsThickness 14 mm
Width 70 mm
Length 490 mm
Wear layer thickness4 and 6 mm
Bottom layerHardwoods
Method of hardening the oil-waxUV radiation
Possibility of sandingRepeatedly
Indoor useAll residential except bathrooms

Parquet Oak Nature

Product Description

Wood characteristics:

  • varied colours
  • any jar
  • acceptable edge whiteness up to 15% of one element
  • healthy knots and putty without restrictions
  • acceptable glance
  • suitable for underfloor heating

Details of the floor

Painted version:

  • 7 layers of varnish – hardened with UV rays
  • varnish permanently bonded to the wood, does not crack or peel off
  • high abrasion resistance

Oil-waxed version:

  • 3 layers of Osmo oil-wax – hardened with UV rays,
  • deep wood impregnation through oil penetration,
  • high abrasion resistance.

Finish Board

  • Parquet is a two-layer floor, ready after gluing, it does not require sanding or varnishing.
  • The top layer, wearable approx. 4 and 6 mm, consists entirely of a solid element – natural wood. The bottom layer is a mosaic made of hard deciduous wood, mainly oak and ash. Joining the layers perpendicularly introduces a crosswise arrangement of the grain of the top layer in relation to the bottom part, which ensures stabilization and prevents the floor from warping.
  • This structure enables the multiple process of sanding (renewing) the floor, thanks to which it serves and delights for years and generations.
  • The most modern tongue-and-groove connection system allows for simple and efficient installation of the floor. The technological structure of each element as well as the method of connecting and installing completely eliminate the resonance effect.
  • Parquet is also an ideal solution for underfloor heating. The perfect design and the best quality raw material used in the production process make the floor perfectly compatible with this type of heating, and the thermal transmittance coefficient guarantees reduction of energy losses to a minimum.

Additional Information

DimensionsThickness 14 mm
Width 70 mm
Length 490 mm
Wear layer thickness4 and 6 mm
Bottom layerHardwoods
Method of hardening the oil-waxUV radiation
Possibility of sandingRepeatedly
Indoor useAll residential except bathrooms

Parquet Oak Exclusive

Product Description

Wood characteristics:

  • similar colours
  • dark antique colour
  • any jar, no white
  • healthy knots
  • acceptable glance
  • thermal treatment
  • suitable for underfloor heating

Details of the floor

Painted version:

  • 7 layers of varnish – hardened with UV rays
  • varnish permanently bonded to the wood, does not crack or peel off
  • high abrasion resistance

Oil-waxed version:

  • 3 layers of Osmo oil-wax – hardened with UV rays,
  • deep wood impregnation through oil penetration,
  • high abrasion resistance.

Finish Board

  • Parquet is a two-layer floor, ready after gluing, it does not require sanding or varnishing.
  • The top layer, wearable approx. 4 and 6 mm, consists entirely of a solid element – natural wood. The bottom layer is a mosaic made of hard deciduous wood, mainly oak and ash. Joining the layers perpendicularly introduces a crosswise arrangement of the grain of the top layer in relation to the bottom part, which ensures stabilization and prevents the floor from warping.
  • This structure enables the multiple process of sanding (renewing) the floor, thanks to which it serves and delights for years and generations.
  • The most modern tongue-and-groove connection system allows for simple and efficient installation of the floor. The technological structure of each element as well as the method of connecting and installing completely eliminate the resonance effect.
  • Parquet is also an ideal solution for underfloor heating. The perfect design and the best quality raw material used in the production process make the floor perfectly compatible with this type of heating, and the thermal transmittance coefficient guarantees reduction of energy losses to a minimum.

Additional Information

DimensionsThickness 14 mm
Width 70 mm
Length 490 mm
Wear layer thickness4 and 6 mm
Bottom layerHardwoods
Method of hardening the oil-waxUV radiation
Possibility of sandingRepeatedly
Indoor useAll residential except bathrooms