varnish permanently bonded to the wood, does not crack or peel off
high abrasion resistance
Oil-waxed version:
3 layers of Osmo oil-wax – hardened with UV rays,
deep wood impregnation through oil penetration,
high abrasion resistance.
Finish Board
Finish Board is a two-layer floor, ready after gluing, it does not require sanding or varnishing.
The 4 or 6 mm EKO wearable layer consists entirely of a solid element – natural wood. The bottom layer is a mosaic made of hard deciduous wood, mainly oak and ash. Joining the layers perpendicularly introduces a crosswise arrangement of the grain of the top layer in relation to the bottom part, which ensures stabilization and prevents the floor from warping.
This structure enables the multiple process of sanding (renewing) the floor, thanks to which it serves and delights for years and generations.
The most modern tongue-and-groove connection system allows for simple and efficient installation of the floor. At the same time, it allows the floor to be laid in various patterns and combinations thanks to the production of elements with the right and left tongue variant. The technological structure of each element as well as the method of connecting and installing completely eliminate the resonance effect.
Finish Board is also an ideal solution for underfloor heating. The perfect design and the best quality raw material used in the production process make the floor perfectly compatible with this type of heating, and the thermal transmittance coefficient guarantees reduction of energy losses to a minimum.
Additional Information
Dimensions
Thickness 14 mm Width 130-150 mm Length 900-1200 mm
Wear layer thickness
4 or 6 mm
Bottom layer
Hardwoods
Method of hardening the oil-wax
UV radiation
Possibility of sanding
Repeatedly
Indoor use
All residential except bathrooms
Previous
Next
Oak Latter Macchiatto Nature
Product Description
Wood characteristics:
varied colours, any jar
edge whiteness allowed up to 15% of the width of one element
acceptable glance
healthy knots and putty without restrictions
special white undercoat
suitable for underfloor heating
Details of the floor
Painted version:
7 layers of varnish – hardened with UV rays
varnish permanently bonded to the wood, does not crack or peel off
high abrasion resistance
Oil-waxed version:
3 layers of Osmo oil-wax – hardened with UV rays,
deep wood impregnation through oil penetration,
high abrasion resistance.
Finish Board
XXL is a two-layer floor, ready after gluing, it does not require sanding or varnishing.
The top layer, usable approx. 3.5 mm, consists entirely of a solid element – natural wood. The bottom layer is birch plywood..
This structure enables the multiple process of sanding (renewing) the floor, thanks to which it serves and delights for years and generations.
The most modern tongue-and-groove connection system allows for simple and efficient installation of the floor. At the same time, it allows the floor to be laid in various patterns and combinations thanks to the production of elements with the right and left tongue variant. The technological structure of each element as well as the method of connecting and installing completely eliminate the resonance effect.
XXL is also an ideal solution for underfloor heating. The perfect design and the best quality raw material used in the production process make the floor perfectly compatible with this type of heating, and the thermal transmittance coefficient guarantees reduction of energy losses to a minimum.
Additional Information
Dimensions
Thickness 15 mm Width 160-180 mm or 200-240 mm Length 1400-2200 mm
Wear layer thickness
3.5 mm
Bottom layer
Hardwoods
Method of hardening the oil-wax
UV radiation
Possibility of sanding
Repeatedly
Indoor use
All residential except bathrooms
Previous
Next
Oak Venice
Product Description
Wood characteristics:
varied colours
any jar
edge whiteness allowed up to 15% of the width of one element
acceptable glance
healthy knots and putty without restrictions
suitable for underfloor heating
Details of the floor
Painted version:
7 layers of varnish – hardened with UV rays
varnish permanently bonded to the wood, does not crack or peel off
high abrasion resistance
Oil-waxed version:
3 layers of Osmo oil-wax – hardened with UV rays,
deep wood impregnation through oil penetration,
high abrasion resistance.
Finish Board
XXL is a two-layer floor, ready after gluing, it does not require sanding or varnishing.
The top layer, usable approx. 3.5 mm, consists entirely of a solid element – natural wood. The bottom layer is birch plywood..
This structure enables the multiple process of sanding (renewing) the floor, thanks to which it serves and delights for years and generations.
The most modern tongue-and-groove connection system allows for simple and efficient installation of the floor. At the same time, it allows the floor to be laid in various patterns and combinations thanks to the production of elements with the right and left tongue variant. The technological structure of each element as well as the method of connecting and installing completely eliminate the resonance effect.
XXL is also an ideal solution for underfloor heating. The perfect design and the best quality raw material used in the production process make the floor perfectly compatible with this type of heating, and the thermal transmittance coefficient guarantees reduction of energy losses to a minimum.
Additional Information
Dimensions
Thickness 15 mm Width 160-180 mm or 200-240 mm Length 1400-2200 mm
Wear layer thickness
3.5 mm
Bottom layer
Hardwoods
Method of hardening the oil-wax
UV radiation
Possibility of sanding
Repeatedly
Indoor use
All residential except bathrooms
Previous
Next
Oak Nature
Product Description
Wood characteristics:
varied colours
any jar
edge whiteness allowed up to 15% of the width of one element
acceptable glance
healthy knots and putty without restrictions
suitable for underfloor heating
Details of the floor
Painted version:
7 layers of varnish – hardened with UV rays
varnish permanently bonded to the wood, does not crack or peel off
high abrasion resistance
Oil-waxed version:
3 layers of Osmo oil-wax – hardened with UV rays,
deep wood impregnation through oil penetration,
high abrasion resistance.
Finish Board
XXL is a two-layer floor, ready after gluing, it does not require sanding or varnishing.
The top layer, usable approx. 3.5 mm, consists entirely of a solid element – natural wood. The bottom layer is birch plywood..
This structure enables the multiple process of sanding (renewing) the floor, thanks to which it serves and delights for years and generations.
The most modern tongue-and-groove connection system allows for simple and efficient installation of the floor. At the same time, it allows the floor to be laid in various patterns and combinations thanks to the production of elements with the right and left tongue variant. The technological structure of each element as well as the method of connecting and installing completely eliminate the resonance effect.
XXL is also an ideal solution for underfloor heating. The perfect design and the best quality raw material used in the production process make the floor perfectly compatible with this type of heating, and the thermal transmittance coefficient guarantees reduction of energy losses to a minimum.
Additional Information
Dimensions
Thickness 15 mm Width 160-180 mm or 200-240 mm Length 1400-2200 mm
Wear layer thickness
3.5 mm
Bottom layer
Hardwoods
Method of hardening the oil-wax
UV radiation
Possibility of sanding
Repeatedly
Indoor use
All residential except bathrooms
Previous
Next
Oak Exclusive
Product Description
Wood characteristics:
similar colours, any jar
acceptable minimum whiteness, healthy small knots
acceptable minimum gloss
suitable for underfloor heating
Details of the floor
Painted version:
7 layers of varnish – hardened with UV rays
varnish permanently bonded to the wood, does not crack or peel off
high abrasion resistance
Oil-waxed version:
3 layers of Osmo oil-wax – hardened with UV rays,
deep wood impregnation through oil penetration,
high abrasion resistance.
Finish Board
XXL is a two-layer floor, ready after gluing, it does not require sanding or varnishing.
The top layer, usable approx. 3.5 mm, consists entirely of a solid element – natural wood. The bottom layer is birch plywood..
This structure enables the multiple process of sanding (renewing) the floor, thanks to which it serves and delights for years and generations.
The most modern tongue-and-groove connection system allows for simple and efficient installation of the floor. At the same time, it allows the floor to be laid in various patterns and combinations thanks to the production of elements with the right and left tongue variant. The technological structure of each element as well as the method of connecting and installing completely eliminate the resonance effect.
XXL is also an ideal solution for underfloor heating. The perfect design and the best quality raw material used in the production process make the floor perfectly compatible with this type of heating, and the thermal transmittance coefficient guarantees reduction of energy losses to a minimum.
Additional Information
Dimensions
Thickness 15 mm Width 160-180 mm or 200-240 mm Length 1400-2200 mm
Wear layer thickness
3.5 mm
Bottom layer
Hardwoods
Method of hardening the oil-wax
UV radiation
Possibility of sanding
Repeatedly
Indoor use
All residential except bathrooms
Previous
Next
Oak Thermo
Product Description
Wood characteristics:
varied light and dark colours
thermal treatment
suitable for underfloor heating
any jar, no white
healthy knots up to 10 mm
Details of the floor
Painted version:
7 layers of varnish – hardened with UV rays
varnish permanently bonded to the wood, does not crack or peel off
high abrasion resistance
Oil-waxed version:
3 layers of Osmo oil-wax – hardened with UV rays,
deep wood impregnation through oil penetration,
high abrasion resistance.
Finish Board
Finish Board is a two-layer floor, ready after gluing, it does not require sanding or varnishing.
The 4 mm EKO wearable layer consists entirely of a solid element – natural wood. The bottom layer is a mosaic made of hard deciduous wood, mainly oak and ash. Joining the layers perpendicularly introduces a crosswise arrangement of the grain of the top layer in relation to the bottom part, which ensures stabilization and prevents the floor from warping.
This structure enables the multiple process of sanding (renewing) the floor, thanks to which it serves and delights for years and generations.
The most modern tongue-and-groove connection system allows for simple and efficient installation of the floor. At the same time, it allows the floor to be laid in various patterns and combinations thanks to the production of elements with the right and left tongue variant. The technological structure of each element as well as the method of connecting and installing completely eliminate the resonance effect.
Finish Board is also an ideal solution for underfloor heating. The perfect design and the best quality raw material used in the production process make the floor perfectly compatible with this type of heating, and the thermal transmittance coefficient guarantees reduction of energy losses to a minimum.
Additional Information
Dimensions
Thickness 14 mm Width 130-150 mm Length 900-1200 mm
Wear layer thickness
4 mm
Bottom layer
Hardwoods
Method of hardening the oil-wax
UV radiation
Possibility of sanding
Repeatedly
Indoor use
All residential except bathrooms
Previous
Next
Ash Thermo
Product Description
Wood characteristics:
varied light and dark colours
thermal treatment
suitable for underfloor heating
any jar, no white
healthy knots up to 10 mm
Details of the floor
Painted version:
7 layers of varnish – hardened with UV rays
varnish permanently bonded to the wood, does not crack or peel off
high abrasion resistance
Oil-waxed version:
3 layers of Osmo oil-wax – hardened with UV rays,
deep wood impregnation through oil penetration,
high abrasion resistance.
Finish Board
Finish Board is a two-layer floor, ready after gluing, it does not require sanding or varnishing.
The 4 mm EKO wearable layer consists entirely of a solid element – natural wood. The bottom layer is a mosaic made of hard deciduous wood, mainly oak and ash. Joining the layers perpendicularly introduces a crosswise arrangement of the grain of the top layer in relation to the bottom part, which ensures stabilization and prevents the floor from warping.
This structure enables the multiple process of sanding (renewing) the floor, thanks to which it serves and delights for years and generations.
The most modern tongue-and-groove connection system allows for simple and efficient installation of the floor. At the same time, it allows the floor to be laid in various patterns and combinations thanks to the production of elements with the right and left tongue variant. The technological structure of each element as well as the method of connecting and installing completely eliminate the resonance effect.
Finish Board is also an ideal solution for underfloor heating. The perfect design and the best quality raw material used in the production process make the floor perfectly compatible with this type of heating, and the thermal transmittance coefficient guarantees reduction of energy losses to a minimum.
Additional Information
Dimensions
Thickness 14 mm Width 130-150 mm Length 900-1200 mm
Wear layer thickness
4 mm
Bottom layer
Hardwoods
Method of hardening the oil-wax
UV radiation
Possibility of sanding
Repeatedly
Indoor use
All residential except bathrooms
Previous
Next
Merbau Nature
Product Description
Wood characteristics:
similar colours
no knots
suitable for underfloor heating
Details of the floor
Painted version:
7 layers of varnish – hardened with UV rays
varnish permanently bonded to the wood, does not crack or peel off
high abrasion resistance
Oil-waxed version:
3 layers of Osmo oil-wax – hardened with UV rays,
deep wood impregnation through oil penetration,
high abrasion resistance.
Finish Board
Finish Board is a two-layer floor, ready after gluing, it does not require sanding or varnishing.
The top layer, usable approx. 6 mm, consists entirely of a solid element – natural wood. The bottom layer is a mosaic made of hard deciduous wood, mainly oak and ash. Joining the layers perpendicularly introduces a crosswise arrangement of the grain of the top layer in relation to the bottom part, which ensures stabilization and prevents the floor from warping.
This structure enables the multiple process of sanding (renewing) the floor, thanks to which it serves and delights for years and generations.
The most modern tongue-and-groove connection system allows for simple and efficient installation of the floor. At the same time, it allows the floor to be laid in various patterns and combinations thanks to the production of elements with the right and left tongue variant. The technological structure of each element as well as the method of connecting and installing completely eliminate the resonance effect.
Finish Board is also an ideal solution for underfloor heating. The perfect design and the best quality raw material used in the production process make the floor perfectly compatible with this type of heating, and the thermal transmittance coefficient guarantees reduction of energy losses to a minimum.
Additional Information
Dimensions
Thickness 14 mm Width 130-150 mm Length 900-1200 mm
Wear layer thickness
6 mm
Bottom layer
Hardwoods
Method of hardening the oil-wax
UV radiation
Possibility of sanding
Repeatedly
Indoor use
All residential except bathrooms
Previous
Next
Ash Nature
Product Description
Wood characteristics:
varied colours, any jar
heartwood and whitish
natural rusty discoloration
healthy knots
suitable for underfloor heating
Details of the floor
Painted version:
7 layers of varnish – hardened with UV rays
varnish permanently bonded to the wood, does not crack or peel off
high abrasion resistance
Oil-waxed version:
3 layers of Osmo oil-wax – hardened with UV rays,
deep wood impregnation through oil penetration,
high abrasion resistance.
Finish Board
Finish Board is a two-layer floor, ready after gluing, it does not require sanding or varnishing.
The 4 mm EKO wearable layer consists entirely of a solid element – natural wood. The bottom layer is a mosaic made of hard deciduous wood, mainly oak and ash. Joining the layers perpendicularly introduces a crosswise arrangement of the grain of the top layer in relation to the bottom part, which ensures stabilization and prevents the floor from warping.
This structure enables the multiple process of sanding (renewing) the floor, thanks to which it serves and delights for years and generations.
The most modern tongue-and-groove connection system allows for simple and efficient installation of the floor. At the same time, it allows the floor to be laid in various patterns and combinations thanks to the production of elements with the right and left tongue variant. The technological structure of each element as well as the method of connecting and installing completely eliminate the resonance effect.
Finish Board is also an ideal solution for underfloor heating. The perfect design and the best quality raw material used in the production process make the floor perfectly compatible with this type of heating, and the thermal transmittance coefficient guarantees reduction of energy losses to a minimum.
Additional Information
Dimensions
Thickness 14 mm Width 130-150 mm Length 900-1200 mm
Wear layer thickness
4 mm
Bottom layer
Hardwoods
Method of hardening the oil-wax
UV radiation
Possibility of sanding
Repeatedly
Indoor use
All residential except bathrooms
Previous
Next
Oak Latte Macchiatto Nature
Product Description
Wood characteristics:
varied colours, any jar,
edge whiteness allowed up to 15% of the width of one element,
acceptable glance,
healthy knots and putty without restrictions,
special white undercoat,
suitable for underfloor heating
Details of the floor
Painted version:
7 layers of varnish – hardened with UV rays
varnish permanently bonded to the wood, does not crack or peel off
high abrasion resistance
Oil-waxed version:
3 layers of Osmo oil-wax – hardened with UV rays,
deep wood impregnation through oil penetration,
high abrasion resistance.
Finish Board
The top layer, wearable approx. 6 mm, 4 mm ECO or 3 mm consists entirely of a solid element – natural wood. The bottom layer is a mosaic made of hard deciduous wood, mainly oak and ash. Joining the layers perpendicularly introduces a crosswise arrangement of the grain of the top layer in relation to the bottom part, which ensures stabilization and prevents the floor from warping
This structure enables the multiple process of sanding (renewing) the floor, thanks to which it serves and delights for years and generations.
The most modern tongue-and-groove connection system allows for simple and efficient installation of the floor. At the same time, it allows the floor to be laid in various patterns and combinations thanks to the production of elements with the right and left tongue variant. The technological structure of each element as well as the method of connecting and installing completely eliminate the resonance effect.
Finish Board is also an ideal solution for underfloor heating. The perfect design and the best quality raw material used in the production process make the floor perfectly compatible with this type of heating, and the thermal transmittance coefficient guarantees reduction of energy losses to a minimum.
Additional Information
Dimensions
Thickness 14 mm Width 130-150 mm Length 900-1200 mm or Thickness 12 mm Width 140-150 mm Length 800-1200 mm